With Enover’s EHP technology, you can reduce the cost many times while providing the highest efficiency from energy!
The fastest, most cost effective and most efficient heat transfer technology known in the world; EHP!
Thanks to the EHP radiators, which give high efficiency at low temperatures, it enables your boiler to operate at 28-30°C.There is very little water in the radiators with EHP. In this way, much less load will be placed on the boiler pump. The life of your boiler will increase.
EHP radiators are the first and only radiators in the world that do not require maintenance and repair.
It doesn’t require maintenance.
Technical Information
| Section Widht | 80 mm |
| Section Depth | 40 mm |
| Connection Diameter | 1/2″ |
| Max Working Pressure | 10 bar |
| Max Working Temperature | 75°C |
| Warranty | 5 years |
| HEIGHT | SECTION WIDTH | HEAT OUTPUTS | HEATING SURFACE | WATER VOLUME | WEIGHT | ||||
|---|---|---|---|---|---|---|---|---|---|
| mm | mm | btu/h | kcal/h | watt | m2/section | l/section | kg/section | ||
| 300 | 80 | 229 | 58 | 67 | 0,114 | 0,01 | 0,45 | ||
| 400 | 80 | 304 | 77 | 89 | 0,152 | 0,01 | 0,55 | ||
| 500 | 80 | 375 | 95 | 110 | 0,191 | 0,01 | 0,64 | ||
| 600 | 80 | 454 | 114 | 133 | 0,229 | 0,01 | 0,74 | ||
| 700 | 80 | 529 | 133 | 155 | 0,267 | 0,01 | 0,84 | ||
| 750 | 80 | 566 | 143 | 166 | 0,286 | 0,01 | 0,89 | ||
| 800 | 80 | 604 | 152 | 177 | 0,305 | 0,01 | 0,94 | ||
| 900 | 80 | 682 | 172 | 200 | 0,343 | 0,01 | 1,04 | ||
| 1000 | 80 | 751 | 189 | 220 | 0,381 | 0,01 | 1,14 | ||
| 1250 | 80 | 945 | 238 | 277 | 0,476 | 0,01 | 1,38 | ||
| 1500 | 80 | 1133 | 285 | 332 | 0,572 | 0,01 | 1,63 | ||
| 1750 | 80 | 1324 | 334 | 388 | 0,667 | 0,01 | 1,87 | ||
| 2000 | 80 | 1512 | 381 | 443 | 0,762 | 0,01 | 2,12 | ||
| THE STATED VALUES REPRESENT THE HEAT OUTPUTS OF 1 SECTION ONLY. TO CALCULATE THE TOTAL HEAT OUTPUT OF A RADIATOR; PLEASE MULTIPLY THE OUTPUT VALUES BY MEANS OF REQUIRED USAGE OF SECTIONS. |
|||||||||
Downloads
All products are published after a long R&D studies including hundreds of CFD analyses.
Connections
Enover’s heating system works in a special method. With this technology there is no water at the top side of products. Therefore, water connections should only be made from the bottom.